Angleshelf of Puerto Rico, Inc.
Carolina Industrial Park Street A. Bldg No. 5 Carolina, Puerto Rico 00985
Tel: (787) 752-5400 - Fax: (787) 750-5015

 

K E L L E Y    E O D    D O C K L E V E L E R S

When the working range of a full size, pit-style dockleveler is not needed, rely on Kelley Edge of Dock (EOD) docklevelers to service your dock equipment needs. Available in air, hydraulic and mechanical activation, all Kelley EODs provide smooth and reliable operation.

KELLEY FX EDGE-OF-DOCK DOCKLEVELER

Summary of Features

  • Simple, ergonomic push-button operation.
  • Broad working range. Five inches above and below dock. Transition plate may be added to accommodate docks without edge channel.
  • Self-cleaning lug-type lip hinge.
  • High volume, low pressure air bag lifting mechanism. Requires no scheduled maintenance.
  • Lifting bag operates under temperature extremes of -65 to + 180 F.
  • Lifting bag with PVC coated polyester fibers retains lifting effectiveness even when punctured; can be easily repaired.
  • Lifting bag, gaskets, and fittings resistant to common chemical washdown exposure and harsh environments.
  • 10 amp fan with two-stage, single-speed, self-cleaning filter, UL- approved motor; runs off 115 volt single-phase electrical power.
  • TRIAL PROGRAM AVAILABLE

 


Architectural Specifications (Short Form)

FX edge-of-dock dockleveler to be _ 20,000 lb. or _ 30,000 lb. capacity with _ 66" or _ 72" wide ramp. Complies with standard ANSI MH14.1- 1987. Workable span to be 29" with 11 1/2" minimum lip projection beyond bumpers. Working range to be 5" above to 5" below dock level with 15" lip. Grease fittings to be provided on rear hinge tubes. To be air operated. Self-contained unit to mount to dock face without concrete pit forming. Unit to include two laminated rubber bumpers 10"x10"x4 1/2" and heavy-duty bumper blocks. Bumper face to project 17 1/2" from dock face. Surfaces to have 4-way raised lug tread plate. To be Kelley model _ FX EOD66, or _ FX EOD72 edge-of-dock as manufactured by Kelley Company, Inc.

Models

Size
Model
Size
WxL
Capacity* Shipping Weight
FX-EOD6620 66 x 29 20,000 570
FX-EOD6630 66 x 29 30,000 595
FX-EOD7220 72 x 29 20,000 595
FX-EOD7230 72 x 29 30,000 635
*capacity per ANSI MH14.1-1987

Operation

Dockleveler rises when NEMA 4 shielded push-button is pushed and held.
Lip automatically extends as deck section descends into trailer bed.
After loading or unloading is complete dock attendant pushes button to activate air system and raise FX EOD. Lip falls pendant, dock attendant releases button, and FX EOD is stored.
In stored position FX EOD is fully supported by dock level support.

Construction

Ramp and lip constructed of durable 50,000 psi tensile yield four way safety tread plate.
1/4" ramp with beam reinforcement.
3/8" (20,000 cap.) or 1/2" (30,000 cap.) lip plate.
Self-cleaning lug-style lip hinge.
Plated full width front and rear hinge pins.
Grease fittings on rear hinge tubes.
Air bag and fan motor attached to pan sub-assembly.
Heavy duty steel bumper blocks with laminated rubber bumpers.

Working (Service) Range

10 inches; 5" above and 5" below dock level.

Optional Features

Optional 17" lip recommended for use when servicing refrigerated vans or other vehicles with step sections at rear.
Consult factory for optional pit mount.

Warranty

2 year structural warranty.
2 year activation warranty.
1 year all other components.
(consult owner's manual for warranty details.)

Trial Program Details

60 DAY trial period.
NO obligation.

Contact your local Kelley representative for necessary Trial Program forms.

Consistent with our policy of continuing product improvement, we reserve the right to change these specifications without notice or obligation.

 

KWIK-PLATE

Summary of Features

 

  • Low cost, self-storing front-of-dock.
  • Easy installation; attaches to existing dock face.
  • Simple one-hand operation-lift and flip into place.
  • Tilt mechanism adjusts to unlevel truck beds.
  • Stores snug against dock face.

 


Architectural Specifications (Short Form)

Kwik-Plate dockleveler to be 20,000 lb. capacity with 6' wide ramp and 30" workable span. To be counterweighted to allow one-person operation. Self-contained unit to mount to dock face without concrete pit forming. Unit to include two heavy-duty dock bumpers. Bumper face to project 11.5" from dock face. To be Kelley Model _____________ as distributed by ___________.

Models

Model Size
WxL
Capacity Shipping Weight
Kwik-Plate* 72" x 30" 20,000 lbs. 1040
Grocery Style** 72" x 30" 15,000 lbs. 1060

* Kwik-Plate is available in two plate profiles, high and low. The higher profile is more versatile because it permits serving trailers 6" above to 4" below the dock. Materials handling equipment with low underclearances may require the flatter, low profile plate which has a restricted working range of 4" above dock to 1 1/2" below the dock. Kwik-Plate extends 12" beyond the bumpers.

**The low profile Grocery Style plate extends 14" beyond the bumpers to assist with refrigerated trucks.

Operation

Assisted by a counterweight, dock worker manually lifts ramp into a horizontal position.
Dockleveler settles onto dock and truck bed.
When truck pulls away from dock, ramp automatically returns to stored position.

Construction

Ramp constructed of durable 50,000 PSI yield tread plate.
Four-way tread plate.
Self-contained counterbalance provides lifting support for ramp.
Heavy-duty rubber bumpers.

Working (Service) Range

Kwik-Plate high profile-10"; 6" above to 4" below dock level. Kwik-Plate low profile-5 1/2", 4" above to 1 1/2" below dock level.

Optional Features

Cart Guard. When stored, lip projects 2" above dock surface, creating a run-off barrier.
Steel-faced bumpers.

 

MECHANICAL EM SERIES DOCKLEVELER

Standard Features

  • 20,000 & 30,000 lbs. Capacities Available
  • Open Lug-Style Lip & Deck Hinge
  • Easy "One-Handed" Lever Operation
  • Simple, Maintenance Free - Gas Spring Counter-Balance System (No adjustments required)
  • Maintenance Strut
  • Laminated Dock Bumpers (10" x 10") With Bumper Extension Boxes


 

Optional Features

Longer Lip For 14" Projection Beyond Bumper
2" Cart Guard
Tapered Lip

 

 


Please click on photo to enlarge.

HYDRAULIC EM SERIES DOCKLEVELER

Standard Features

 

  • Piano Style Lip & Deck Hinge, With Grease Fittings.
  • Fully Hydraulic Lip & Deck Constructed of 1/2" 50ksi Tread Plate.
  • Integral Maintenance Strut
  • Laminated Dock Bumpers With Bumper Extension Boxes
  • Self Contained Motor/Pump System (Available in All Voltages)
  • Single Push Button Activation
  • Automatically Returns to Stored Position

 

Optional Features

Longer Lip For 14" Projection Beyond Bumper
2" Cart Guard
Tapered Lip