Angleshelf of Puerto Rico, Inc.
Carolina Industrial Park Street A. Bldg No. 5 Carolina, Puerto Rico 00985
Tel: (787) 752-5400 - Fax: (787) 750-5015

Manual Stacker Options

 

	Ram Interchanges with forks on adjustable fork models for roll and coil handling.
	Model Number	Description and Specification	Shipping Weight
	RR1	Ram 2 1/2" round x 20" long, 1000 lb capacity @ 15" load center	13
	RR2	Ram 2 1/2" round x 24" long, 1000 lb capacity @ 18" load center	16
	RR3	Ram 2 1/2" round x 13" long, 1000 lb capacity @ 13" load center	12
	RR4	Ram 2 1/2" round x 30" long, 1000 lb capacity @ 20" load center	20
	RS1	Ram 3" square x 20" long, 1500 lb capacity @ 15" load center	15
	RS2	Ram 3" square x 24" long, 1500 lb capacity @ 18" load center	24
	RS3	Ram 2 1/2" square x 30" long, 1500 lb capacity @ 20" load center	22
	RS4	Ram 3" square x 30" long, 1500 lb capacity @ 20" load center	27
	RS5	Ram 3" square x 36" long, 1500 lb capacity @ 24" load center	31

 

	Boom with Hook Mounts on fork model backplates for lifting and suspending loads.
	Model Number	Description and Specification	Shipping Weight
	B13	13" boom with hook, 1000 lb capacity @ 13" load center	22
	B15	15" boom with hook, 1000 lb capacity @ 15" load center	22
	B20	20" boom with hook, 1000 lb capacity @ 20" load center	25
	B25-25	25" boom with hook, 1500 lb capacity @ 24" load center	46

 

	Forks
	Model Number	Description and Specification	Shipping Weight
	AF25	Adjustable forks, pair 25" length	62
	AF30	Adjustable forks, pair 30" length	72
	AF36	Adjustable forks, pair 36" length	114
	AF42	Adjustable forks, pair 42" length	130
	BP	Forks bolted in place	N/A
	FF	Forks flat to the floor	N/A

 

	Slip on Platform
	Model Number	Description and Specification	Shipping Weight
	SP24	Slip-on platform, 24" x 24" for 13" and 15" load center	32
	SP32	Slip-on platform, 32" x 30" for 18" and 20" load center	52
	SP40	Slip-on platform, 40" x 36" for 24" load center	95

 

Fifth Wheel Recommended for lifts with wide straddles and heavier load capacities. 8" polyurethane plastic wheel and spring loaded handle. Factory installed on B800 and BT800 Series only. FW: Weight 32 lb

 

Remove Control Not for lifting personnel. Must be factory installed. For Battery or Electric AC operated lifts. RC-10: One station. Weight 2 lb RC-20: Two station. Weight 4 lb FC-10: Foot control. Weight 15 lb

 

Drum Grab Handler DG30 Automatically grabs 30 and 55 gallon drums for handling and stacking in a vertical position. Mounts on the backplate of any straddle fork model. Parrot-beak mechanism for steel and fibre drums. DG-30: Weight 36 lb DG-30PS: For Pallet Straddle Stacker. Weight 51 lb (Not available for counterweight lifts.)

 

Fire-Resistant Hydraulic Fluid Water-glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

 

Wheel Material Standard wheels are phenolic plastic. Optional wheel material available.

 

Reversed Forks Ideal for overhead installation. Forks can be modified in a reverse position giving an increased lowered / raised height.

 

R-5 Roller Bed Excellent for transferring heavy objects to/from lift with minimum effort. Front or side loading. Rollers on 3" center. 27" x 30" area, mounted on a 32" x 30" platform. 1000 lb capacity. Weight 145 lb (Requires 18" LC.)

 

P-6 Die Puller Equipped with hand-operated winch with cable and hook for pulling dies over roller bed. 27" x 30" roller area mounted 32" x 30" platform. 1000 lbs. capacity. Weight 185 lb (Requires 18" LC.)

 

Height Standard lift heights can be decreased to meet special handling requirements.

 

Base Legs Standard straddle dimensions can be increased or decreased to fit any size pallet or load. Available on straddle fork models only.

 

Larger Motor A/C Doubles lifting speed on Presto AC Electric Lifts; 1 Phase, 60 Cycle, 220V, 2HP or 2HP, 220/440V, 3 Phase, 60 Cycle AC motor. Larger unit available. Consult factory.

 

Hazardous Location Motors Special motors and fittings are available for all stationary AC electric lifts. U.L. Approved. Class I Group D. Class II, Groups F & G (Engineering approval required).

 

Air Power Optional air motors that operate from your factors airline supply are available.